Working with the installation of pipe fittings is one of the biggest tasks for a plumber. They have to deal with different kinds of pipes and their fittings on a daily basis.
And so, many times it becomes very common for them to make some mistakes while installing different pipe fittings. This may include from selecting wrong pipe fittings from plumbing inspection camera wholesale suppliers or plumbing accessories wholesalers in the USA to ignoring the need for using relevant pipe fitting sealants and tapes, etc.
Avoiding these mistakes is always necessary to do the best pipe fitting works.
Common Mistakes Needing Avoidance While Installing The Right Pipe Fittings
Mistakes such as buying wrong size pipe fittings from plumbing accessories wholesalers in the USA and many more must be avoided while installing pipe fittings, by plumbers.
- Doing Incorrect Measurement And Planning
This is one of the most common mistakes made while installing pipe fittings. Neglecting the criticality of doing accurate measurements and proper planning, is always needed.
Before starting any of these tasks, it is good to take enough time to measure and plan precisely. This may include assessing the correct size and shape of the pipe, knowing the overall layout of the pipeline system, and understanding the type of pipe fittings needed.
Failing iot do this in the right way can certainly lead to wrong fittings, pipe leaks, and reduction in the efficiency of the pipes.
- Choosing Wrong Pipe Materials
Selecting the right material for the pipes and its fittings from plumbing inspection camera wholesale suppliers or plumbing accessories wholesalers in the USA, is always necessary for the right working of the whole plumbing system.
Unique materials offer different levels of longevity, rust/corrosion-proofing, and budget-friendliness. Some very common materials for pipes as well as its fittings are copper, galvanised steel, PVC, etc.
One common mistake is using irrelevant materials or not considering the specific needs of the pipelines. Using the wrong material, which is not made for that purpose can lead to many severe issues in the pipelines such as pipe leakages or blocks.
- Not Giving Proper Tights To The Pipe Fittings
Giving proper tights to all pipe fittings is a must. This is needed to avoid any kinds of leakages and ensure the right efficiency of the whole pipelines.
There should be no over-tightening or under-tightening of the pipe fittings. These can certainly lead to a wide range of issues, such as sealing threads getting stripped, leakage in joints, and other potential damage to the pipelines.
Over-tightening is a mistake made very frequently. It can easily cause breaking and cracking of the pipe and its fittings, etc. This can also damage the strong seal made between the pipes and their fittings, forcing it to leak.
On the other hand, under-tightening may not develop proper and sufficient sealing, which can also lead to severe pipe leaks, with the passing time. To prevent these issues effectively and efficiently, it is always recommended for each and every plumber to use all the relevant tools and equipment or for giving proper tights to the pipe fittings.
- Not Using Pipe Sealing Threads And Tapes
This is an often overlooked yet critical step for installing pipe fittings. The use of sealing threads or Teflon sealant tapes are always necessary. These robust and useful materials help to develop a strong seal between all pipe fittings. This helps in preventing severe pipe leaks and boosting the overall integrity of the pipeline system.
Even some professional plumbers tend to make the mistake of skipping this step, thinking that it is not needed. Additionally, even after using the correct sealing threads for the pipe fittings, using a thread sealant will also be helpful. This will provide an added layer of safety against leakage, especially when the pipe is installed in any high-pressure machines.
- Not Following Pipe Expansion/Contraction
Plumbing pipes have to handle certain fluctuations in the temperature. And so, not following the matters pipe expansion and contraction can certainly develop severe issues in the whole pipeline system. If the pipes get heated up, they will expand, and if the pipes become cool or frozen, they will contract.
This natural process must be considered at the time of installing pipe fittings. Or else, this will result in putting excessive pressure on the pipe fittings. This may lead to leakage in the pipe fittings or force it to malfunction. To assess pipe expansion and contraction in the right way, it is necessary to avoid fixing pipes and its fittings with excessive force.
Using pipe joints that can expand, flexible pipe connectors, and other specific fittings. This will help the pipeline to handle the pressure generated by changes in the temperature levels. This will ultimately ensure durability and reliability of the whole pipeline systems, effectively.
Conclusion
Installing different pipe fittings must be done in the right way. So, plumbers must avoid making some common mistakes while doing it such as buying the wrong materials or sizes of pipe fittings from plumbing inspection camera wholesale suppliers or plumbing accessories wholesalers in the USA, etc.
Avoiding these mistakes will help them to complete each and every task of plumbing pipe fittings, more professionally and swiftly.